OMEGA DP41-S-230-S2 High Performance Strain Meter, High Resolution 6-Digit Display (Single Ended, Strain, Strain, 1/8 DIN, 230 Vac)

CMRR: 120 dB

NMRR: 60 dB

Width: 3.78 in

Height: 1.89 in

Length: 6.5 in

Weight: 574 g

Accuracy: ± 0.005 %

Mounting: Panel

Polarity: Unipolar/Bipolar, programmable

Materials: Polycarbonate

Input Type: Single Ended, Strain

Resolution: 15-bit

Form factor: 1/8 DIN

Display Note: Red 6-digit, 14-segment, 13.7 mm (0.54") high; 4 alarm indicators

Display Type: LED

Reading Rate: 3/s or 13/s, 60 Hz; 3/s or 12/s, 50 Hz

Warm Up Time: 50 min

Output Signal: N/A

Sampling Rate: 13 Hz (13 updates/second)

Step Response: 1 s to 99.9%

Data Interface: RS232

Supply Voltage: 230 Vac

supply-voltage: 230 Vac

Span Adjustment: 0.00001 to 500,000, programmable

Input Range Note: 0 to 100 mV, 0 to 1V, 0 to 5V, 1 to 5V, 0 to 10V, 0 to 100V, ± 50 mV, ± 500 mV, ± 5V, ± 50V, 0 to 20 mA, 4 to 20 mA

Measurement Type: Strain

Number of Digits: 6

Number of Inputs: 1

Number of Relays: 2

SetPoint Outputs: 4 Isolated Open Collector; Rated 150 mA at 1V Sink, 30V Open

Cutout Dimensions: 1.772 x 3.622 in

Offset Adjustment: 0 to 999999 or 0 to - 99999 programmable

Power Consumption: 10 W

Relative Humidity: 95% RH non-condensing

Sensor Excitation: 10 V at 30 mA; 24V at 25 mA

Supply Power Note: 230 Vac, 49 to 400 Hz

Supply Power Type: AC

Common Mode Voltage: 1500 Vp per HV test

Data Interface Note: 300/600/1200/2400/4800/9600/ 19.2K baud; RJ11 4-wire connection; programmable to transmit current display, alarm status, min/max, actual measured input value and status

Input Configuration: Front panel buttons or via your computer

Internal Resolution: 15 bit

Power Consumption Note: 6 W Nominal, 10 W

Sensor Break Protection: Up-scale or down-scale, programmable

Storage Temperature, Max: 85 °C

Storage Temperature, Min: -40 °C

Operating Temperature, Max: 50 °C

Operating Temperature, Min: 0 °C

Analog-to-Digital Technique: Dual slope

Span Temperature Coefficient: ± 20 ppm